Cc3200 Sdk For Mac
- Cc3200 Sdk For Mac High Sierra
- Cc3200 Sdk For Mac Windows 10
- Cc3200 Sdk For Mac Windows 7
- Cc3200 Sdk For Mac Windows 10
- Android Sdk For Mac
Introduction of TI CC3200 WiFi Modules
The TI CC3200 WiFi Modules, used for data transparent transmission. USR-C322 is a wifi module released by USR IOT, which has the features of minisize, low power and industry-grade. The hardware of USR-C322 wifi module integrates MAC, baseband chip, RF transceiver unit and power amplifier.
USR-C322 wifi module is based on TI CC3200 chip, which has industrial ARM Cortex-M4 core and ultra-low power operation mechanism. And it supports WiFi protocol and TCP/IP protocol. User can achieve the function of UART devices connecting to Internet with simple configuration.
The HTTP Web Client is used to perform HTTP GET and POST requests, the current version that comes with CC3200 SDK 1.1.0 needs to be updated with the ones found in the Resources folder of this repository. SOFTWARE DEVELOPMENT KIT (SDK) Download SimpleLink Wi-Fi CC3200 Software Development Kit (SDK) CC3200SDK — The SimpleLink™ Wi-Fi® CC3200 SDK contains drivers for the CC3200 programmable MCU, 40+ sample applications, and documentation needed to use the solution. The ccs is running on mac, just the sdk files and projects are from a drive mounted by the virtual machine since the sdk cannot be installed on mac os x. The jumper configuration is as shown in the tutorial, all projects compile without errors, some generate a couple warning messages with paths like.
Features of TI CC3200 WiFi Modules
Support Wi-Fi@2.4 GHz 802.11 b/g/n wireless standards
Sep 13, 2014 I recently got a cc3200 lauchpad and installed ccs 6, later installed energia to work with, I formated and updated new firmware. I programmed the lauchpad using energia by making the jumper sop2 to j8 and my program blink led is successfully uploaded but i cannot see the led blinking.
Based on ARM Cortex-M4 kernel, running frequency of 80 MHZ
Support WEP, WPA/WPA2 security mode
Support AP/STA working mode
Support Simplelink/usrlink networking configuration
Support custom webpage function
The fully integrated serial to wifi TCP/UDP transmission function,the rate of serial port up to 3M bps
Support two uart and three socket communication
Support PC1 16 bytes encryption when work in transparent transmission mode
Support httpsD Client function
Support websocket function
Support SSL Client function
Support search in local area network (LAN) and wireless parameters setting function
Support TCP/UDP Client registration packet mechanism
Support class RFC2217 automatic baud rate adaptation function
Supports 485 transmission control
Support AT+ simple instruction set configuration
Single 3.3 V power supply
Ultra low power mode, support deep dormancy
Support internal/external antenna option
Minisize: 18.22mm*26.65mm*2.8mm SMT
FCC/CE/RoHS certificated
Function of TI CC3200 WiFi Modules
TI CC3200 Chip: TI chips; based on ARM Cortex-M4 kernel; running frequency of 80 MHZ
Ultra-low power: Working : Min 3.5mA; Deep Sleep : Min 25uA
Open SDK: Support secondary development according to TI SDK and “USR” encapsulated SDK
High-speed UART: Max baud rate of 3Mbps (with specific firmware and opening the flow control; In this firmware, the module only can work in transparent transmission mode)
Simplelink: one key access to WiFi
Cc3200 Sdk For Mac High Sierra
Double serials: two UARTs
Three links: three TCP links
Two encryption communication methods: PC1 Encrypt,SSL encryption submission
More functions: custom webpage, websocket, httpsd client
No data loss
Application Field of TI CC3200 WiFi Modules
WiFi remote control and monitoring, TCP/IP and WiFi coprocessor
WiFi remote control toy such as aircraft and cars
WiFi Internet radio, camera, digital photo frame
Medical instrument, data acquisition, handheld device
WiFi fatness testing machine, smart card terminal, Smart Home
Instrument, equipment parameter monitoring, wireless POS machine
Modern agriculture, military field and other wireless related secondary development applications
Ultra-low Power TI CC3200 WiFi Modules
C322 has five power modes,which has Min.3.5mA standby power and has Min.25uA deep sleep power.Its power control can be the highest level.
Structure of TI CC3200 WiFi Modules
Function Upgrade of TI CC3200 WiFi Modules
Data Submitted to Web Server Directly
Small Size
Images of TI CC3200 WiFi Modules
NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
Overview[edit]
CC3200 Antenna Selection is method by which user can configure the WLAN RF Antenna on the CC3200 device from a Browser. The CC3200 device scans the Access Points with 2 different Antennas, stores the SSID and RSSI information in the memory and create an HTML page. User can open the HTML page and select the Antenna which he/she wants to configure. Also user can check the connection to the Access Point using the selected Antenna.
Prerequisites[edit]
- CC3ANTENNABOOST (also known as CC31xx_antenna_diversity_board)
Usage[edit]
- Flash Example Content(html,image,js,Application binary)on serial flash by following below steps.
- If CC3200 SDK is installed at default location C:tiCC3200SDK
- Open C:tiCC3200SDKcc3200-sdkexampleantenna_selectionhtmlantenna_selection.ucf session file in Uniflash.
- Flash the files to the device. Detailed instructions at Uniflash User Guide.
- If CC3200 SDK is not installed at default location C:tiCC3200SDK
- Open <cc3200-sdk>examplesantenna_selectionhtmlantenna_selection.ucf session file in Uniflash.
- Modify Url for all the files in the list.
- Flash the files to the device. Detailed instructions at Uniflash User Guide.
- If CC3200 SDK is installed at default location C:tiCC3200SDK
- Run the reference application
- Run From IDE (IAR/CCS)
- Make the Board Modification as mentioned in the following section.
- Open the Project as mentioned in the <cc3200-sdk>docsCC3200-Getting Started Guide.pdf
- Build and download the application to the board
- Run Flashed Binary
- Remove SOP-2 Jumper on Board and Press Reset. Refer <cc3200-sdk>docsCC3200-Getting Started Guide.pdf for detailed Information
- Make the Board Modification as mentioned in the following section.
- Run From IDE (IAR/CCS)
- CC3200 Device first comes up in STA mode, scans for visible access-points. Next, it restarts and comes up in AP mode (Default SSID: mysimplelink-<MacAddr>)
- User connects his/her WIFI enabled device PC/MAC/Smartphone to above AP
- Type 'mysimplelink.netmain.html' in browser. it will Open CC3200 Main HTML Page
- Click/Press on Antenna Selection which will open the Antenna Selection page as shown in picture below
- Antenna Selection page displays the list of the Access Points SSID and RSSI with 2 different Antenna
- User select the AP by clicking on the Radio Button
- User also need to provide Security Type, Security Key and Profile Priority in the corresponding fields
- User clicks Add Button
- Device then switches to Station Mode and connects to the selected AP
- After the Connection is Successful or Failed, Alert Message is Displayed
Board Modifications[edit]
Below modifications are required on CC3200-LP for working with CC3ANTENNABOOST
- Unmount R111 & Mount R110
- Connect the U.FL connectors, J18 on Launch Pad to J19 on Antenna Board with U.FL-U.FL connector cable.
- Stack the Launch Pad and Antenna Board as shown in the picture below
Source Files briefly explained[edit]
- main.c
- Select Antenna 1
- Scans and Stores AP information
- Select Antenna 2
- Scans and Stores AP information
- Handles HTTP GET request to provide AP List
- Handles HTTP POST request to receive command to connect to AP with Selected Antenna
- Connection to the selected AP
- startup_ewarm.c
- Implements interrupt vector table when using IAR ewarm tool chain
Note: This example can be used either on TI-RTOS or FreeRTOS.For the application to work with TI-RTOS, ti_rtos_config project need to be imported into the application workspace. These projects can be found in CC3200-SDK under ti_rtos folder. Please follow this link for CC3200 TI-RTOS usage CC3200 TI-RTOS
Limitations/Known Issues[edit]
- Only 5 APs are displayed
- Duplicate SSIDs are displayed when the SSID has multiple BSSIDs
- During Connection Status Check, User Device PC/MAC/Smartphone might connect to different AP, User need to reconnect to the SimpleLink AP Again
Links[edit]
Cc3200 Sdk For Mac Windows 10
{{#invoke: Navbox | navbox }}{{#invoke: Navbox | navbox }}
Cc3200 Sdk For Mac Windows 7
{{
Please post only comments related to the article CC3200 Antenna Selection Application here. | Keystone=
Please post only comments related to the article CC3200 Antenna Selection Application here. | C2000=For technical support on the C2000 please post your questions on The C2000 Forum. Please post only comments about the article CC3200 Antenna Selection Application here. | DaVinci=For technical support on DaVincoplease post your questions on The DaVinci Forum. Please post only comments about the article CC3200 Antenna Selection Application here. | MSP430=For technical support on MSP430 please post your questions on The MSP430 Forum. Please post only comments about the article CC3200 Antenna Selection Application here. | OMAP35x=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article CC3200 Antenna Selection Application here. | OMAPL1=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article CC3200 Antenna Selection Application here. | MAVRK=For technical support on MAVRK please post your questions on The MAVRK Toolbox Forum. Please post only comments about the article CC3200 Antenna Selection Application here. | For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article CC3200 Antenna Selection Application here. }} |
Cc3200 Sdk For Mac Windows 10
Links | |||
|